Background correction in aas pdf

Background correction in aas pdf
Volume 19, Issue 2 (1988) 95 BACKGROUND CORRECTION IN ATOMIC ABSORPTION SPECTROSCOPY (AAS) Authors: Walter Slavin Glen R. Carnrick Perkin-Elmer Corporation
Spectral deviations from background interferences can be significant at times and slight at others, but with the proper application of background correction techniques, these deviations can be minimized while enhancing the signal from the analyte.
Agilent 55 AA Atomic Absorption Spectrophotometer Author John Sanders Application Note Atomic Absorption Introduction The reduction of lead levels in gasoline has been a priority of environmental agen-cies around the world since the early eighties. In this paper we describe the use of Agilent’s 55B AA atomic absorption spec-trophotometer when applied to the analysis of unleaded gasoline for
The book aims at presenting an exhaustive survey of the applications of Electrothermal Atomization Atomic Absorption Spectrometry (ETA-AAS) with Zeeman background correction in a variety of fields.
Title: Background Correction In AAS – Can You Really Trust It As Much As You Do? Author: Oliver Büttel; Analytik Jena AG Subject: Background Correction (BGC) is an essential part of any spectrometric analysis.
background correction, the instrument lets you choose the technique best suited to your particular analysis. It also allows you to analyze everything from the simplest to the most complex sample matrix on the same system without compromising performance or sensitivity. PerkinElmer’s patented longitudinal Zeeman design: • Allows for transverse heating of the graphite tube, dramatically
The experimental results for the background absorption induced by scattering of radiation are in good agreement with theory. Substantial additional distortions in the output signal due to interaction of molecular vapor with the graphite surface arise in the case of a molecular background.
COBALT 265 7. ANALYTICAL METHODS The purpose of this chapter is to describe the analytical methods that are available for detecting, measuring, and/or monitoring cobalt, its metabolites, and other biomarkers of exposure and effect to

Background correction in Atomic Absorption Spectroscopy

Calculation of the Background Correction Error in
Background Correction for Blood-Lead Determination in Customer-Validated Applications. 2 Instrumentation A PinAAcle 900T flame and longitudinal Zeeman furnace atomic absorption spectrometer was used for all measure- ments. A PerkinElmer Lumina™ single-element Pb hollow cathode lamp (Part No. N3050157) was used as the light source and argon was the normal gas type. …
Effects of Reductants on the Fluorescence Spectra of Natural Organic Matter Marta Viscut, Dr. Julie Korak, Prof. Fernando Rosario-Ortiz • Fluorescence Spectroscopy –bulk characterization technique for Natural Organic Matter (NOM) • Used for qualitative and quantitative characterization • Highly sensitive to the sample conditions • Thiosulfate (TS) and ascorbic acid (AA) are
BG = Background Absorbance; AA = Atomic Absorbance. Peak Profile – For GF-AAS, peak profile (shape of absorbance vs. time graph) is used to evaluate the quality of the analyte atomization.
If caused by fuel/oxidant mixture, then correction is possible by running a blank and performing background subtraction. More troublesome problem when absorption or scattering
Atomic Absorption Spectrophotometer (AAS) All of our AAS’s are controlled by GBC’s fully featured Windows® based software, and include a complete range of accessories such as the System 5000 graphite furnace system, HG3000 hydride system, and autosampler/dilutors.
The iCE 3000 Series AAS enables simple measurement of elements in a wide range of samples. The flame atomizer is ideal for the measurement of high concentration samples, whilst the furnace atomizer achieves sub ppb detection. The dual atomizer system with Stockdale optics incorporates advanced background correction with a unique quadline deuterium source and optional Zeeman correction to
A common inexpensive technique for background correction in flame Atomic Absorption Spectroscopy is deuterium background correction. The correction is effective over the wavelength range of 180nm -420nm. Background level becomes significant at lower wavelength range.

Background Correction D2 D2 Lamp Current 75% 75% Signal Measurement Continuous Continuous Measurement Time 4s 4s Replicates3 3 . 2 Figure 1: An example of Spectrometer parameters for iron. Sample Preparation Standards Iron and magnesium stock standard solutions containing 1000 mg/L of each were diluted with a pre-mixed solution of deionised water and analytical grade concentrated …
In both cases – linearization and background correction, as already shown in classical AAS, a logarithmic transformation of the photodetector signal was …
Accurate background correction. Analysis of environmental samples for trace level analytes requires precise accurate measurement. This is critical where transient background and analyte signals in the graphite furnace change rapidly with time and introduce measurement errors.
Accuracy in Furnace Atomic Absorption Spectroscopy W. Slavin Perkin-Elmer Corporation 901 Ethan Allen Hwy. Ridgefield, CT 06877 This paper holds that, when graphite furnace atomic absorption spectroscopy (GFAAS) is used correctly, it comes as close to being accurate as any analytical technique that has been proposed for trace metal determination. The signal for the ana-lyte does not …
A newly developed method of background correction for atomic absorption spectrometry combined with the Varian Techtron carbon rod atomizer, model 63, has been applied to the direct determination of Pb, Zn, Fe, Cu, Ni, Co, and Cd in sea water.
Background Correction (BGC) is an essential part of any spectrometric analysis. Typically a non-specific signal, the spectral background, is superimposed on the analyte-specific signal and needs to be excluded to obtain the net analyte signal.
Criminal Justice – Corrections (CRJ.CRO.AAS) Associate in Applied Science Human Services Auburn Hills Campus The Corrections program provides students with an educational background in: police administration and procedures, criminal investigations, and law. Graduation fulfills the entrance requirements for the Police Academy at OCC. NOTE: Completion of an academy is required to …
I am detecting Ca with an AAS Method using an Perkin elmer AAnalyst800. The resulsts are satisfying. Nevertheless I have no Idea why I don´t have to use any kind of background correction
PDF For a long time simultaneous multielement determination by AAS has been a subject of intensive research. In this work a simultaneous multielement atomic absorption spectrometry method is
Corrections and Police Science. Students must maintain a 2.0 (C) cumulative GPA (General Education Students must maintain a 2.0 (C) cumulative GPA (General Education and vocational courses) to graduate under the CRJS program.

Fitted Background Correction (FBC)— fast, accurate and fully-automated background correction Technical Overview 5100 ICP-OES. signal from the detector when it is not exposed to the emission source (argon plasma). The type, design and overall quality of the optical system will also define the relative background observed on a particular ICP-OES system. The magnitude of background …
Atomic Absorption Spectrophotometers (AAS) Atomic absorption spectroscopy (AAS) determines the presence of metals in liquid samples. Metals include Fe, Cu, Al, Pb, Ca, Zn, Cd and many more.
Atomic absorption spectroscopy (AAS) is fundamentally a very simple technique. Light at the resonance wavelength of an element can be absorbed by atoms of that element in the vapor phase. This reduction in light from the source is the AAS signal. It is monotonically correlated with the number of
This leads to increased background but Zeeman effect background correction can compensate adequately for this. The final cycle times were 53 to 70 seconds and analytical accuracy was verified by comparing analytical data to data obtained using a more conventional furnace program.
Background correction The D2 lamp background correction capability at 1A is better than 30 times The S-H background correction capability at 1.8A is better than 30 times. Light Source System Lamp turret 6-lamp turret 4-lamp turret
The correction for background radiation is typically made by first selecting background points or regions and then a correction mode or algorithm. The ‘algorithm’ or ‘correction mode’ depends upon the curvature of the background, as is illustrated below.
AAS Theory San Diego Miramar College
AAS and ICP Determination of Heavy Metal Content in Tobacco 539 Material and Methods Instrumentation Two detection methods most frequently used for heavy metals
• Deuterium lamp background correction. • Self-absorption background correction. Integrated Design • The GeminAA features an integrated flame and graphite furnace design that contains the optical system, atomizer, graphite furnace power supply and electronics all in one unit. This makes it one of the most compact Tandem AAS in the world. • Optimized lamp power supply technology to
Non-specific absorption in AAS (absorption background) is an attenuation of the analytical line radiation, which is not caused by absorption by free atoms of the element. If the non-specific absorption is not corrected it induces a positive bias. It is much more serious for GF AAS as compared to F AAS, especially in the region of 180-350 nm. Non-specific absorption is caused by light
The standard requires ICP-AES instrumentation equipped with a background correction system. Usually, background correction is included. The standard refers to NPR 6425 for performance tests and performance limits.
2 continuum or Zeeman background correction to control flame or molecular absorption. High High concentrations of calcium, sulfate, carbonate, phosphate, iodide, fluoride, or acetate can be corrected.
Improved Methods for Fluorescence Background Subtraction from Raman Spectra P.J. Cadusch1, M.M. Hlaing2, S a background-correction algorithm for Raman spectra has been developed using wavelet peak detection, wavelet derivative calculation for peak width estimation, and penalized least squares background fitting.[22] This approach adaptively separates the measured data samples into …
4 ICP OPTICAL EMISSION SPECTROSCOPY TECHNICAL NOTE 05 40Ar16O on56Fe, or 40Ar-40Ar on 80Se. Element equations (similar in principle to inter-ele-ment correction in ICP-OES) can be used. – vtech parking garage instructions Design Considerations for High Performance Background Correction Systems in Atomic Absorption Spectrometry The Thermo Scientific iCE 3000 Series AA Spectrometers are fitted with highly efficient background correction systems for flame and furnace use. Their important design features are described in this article along with discussions on the advantages and disadvantages of other …
Perfect background correction (BC) can be obtained only when the background absorbance measurement corresponds exactly in space, time, and wavelength with the atomic absorbance measurement. Since exact coincidence of all three parameters is obviously impossible, it is customary to give priority to the equality in space and to make the difference in time and/or wavelength as small …
Concepts, Instrumentation and Techniques in Atomic Absorption Spectrophotometry Richard D. Beaty and Jack D. Kerber Second Edition THE PERKIN-ELMER CORPORATION
The Smith-Hieftje background correction is a bit more complicated. Basically what happens is that this emission tube has two parts. A heater to vaporize the source of the atoms in the tube and an electron beam to stimulate an excited state. In this type of emission tube the heater is pulsed high and low. When the heater is low it produces enough metals atoms so that the atomic line emission is
There are a number of ways to deal with spectral interferences in ICP-OES: 1. Use the technique, but use standard addition to calibrate and analyze samples or 2. Use the calibration curve method with matrix matching for standards and samples or 3. Use the calibration curve method and do corrections for spectral interferences, using either the spectral corrections graph or the easier PC based
2 continuum or Zeeman background correction to control molecular absorption. High concentrations High concentrations of calcium, sulfate, carbonate, sulfate, carbonate, phosphate, iodide, fluoride, or acetate can be offset by an additional sample treatment
A new method is described and tested for background correction in atomic absorption spectrometry. Applicable to flame or furnace atomizers, the method is capable of correcting back-grounds caused
iCE 3000 Series Atomic Absorption Spectrometers Flame and furnace AAS analysis for routine laboratories • 2 3 iCE 3000 Series AAS Simple, automated, single element analysis by flame or graphite furnace AAS from ppb to % The Thermo Scientific™ iCE™ 3000 Series AAS enables simple measurement of elements in a wide range of samples. The flame atomizer is ideal for the …
AS TechniquesAS Techniques for the Analysis of Environmental SamplesEnvironmental Samples Novj Sad 2008, January 30th Riccardo Magarini ICPMS /ICPOES /AAS specialist
background correction system, included as standard with all models. • The GBC performance guarantee – sensitivity and precision superior to that of any other instrument manufacturer. •Data storage using a high capacity hard disk. Storage is provided for applications, results, graphics, sample labels, weights and dilutions, report headings, etc. GBC makes validation easy. The GBC IQ/OQ/PQ
Interference is a phenomena that leads to changes in intensity of the analyte signal in spectroscopy. Interferences in atomic absorption spectroscopy fall into two …
The types, causes, examples and corrections for interferences in atomic absorption spectroscopy. Radiation overlap and scattering, chemical formation and dissociation, ionization and matrix. Radiation overlap and scattering, chemical formation and dissociation, ionization and matrix.
Types of Spectral Interference ICP-OES Inorganic Ventures
Atomic Absorption Spectroscopy (AAS) The following is general background for AAS and for specific operational details on the protocol for the P-E 3030B or the 800 AAnalyst . Introduction — Atomic-absorption spectroscopy (AAS) uses the absorption of light to measure the concentration of gas- …
634 S SPECTROPHOTOMETERS Model 02-enriched flame*1 Flame emission The number of HCL*2 Auto Alignment HP-HCL*3 Background correction Auto sampler PC control Flow
Continuum-source background correction is widely used in FAAS and ETAAS, whereas Zeeman background correction and pulsed lamp background correction are often preferred in ETAAS. View Full Article (HTML) Get PDF (278K)
4.3 Background correction is important when using flameless atomization, especially below 350 nm. Certain samples, when atomized, may absorb or scatter light from the lamp.
Background Correction in AAS Absorption by the flame atomizer itself as well as by concomitants introduced into the flame or electrothermal atomizer can cause serious problems in AAS. Rarely are there interferences from absorption of the analyte line by other atoms since the HCL lines are so narrow.
Chapter 9: Atomic Absorption & Atomic Fluorescence Spectrometry • Sample Atomization • Atomic Absorption (AA) • Atomic Fluorescence (AF) – Both AA and AF require a light source
A New Background-correction Method for Atomic Absorption

Corrections Associate of Applied Science kckcc.edu

Fitted Background Correction (FBC)— fast accurate and

The Determination of Lead in Unleaded Gasoline Using the

LEAD by Flame AAS 7082

Lecture 10 Atomic Spectroscopy AA & AF – UMass Lowell

iCE 3000 Series Atomic Absorption Spectrometers
how to appeal a parking ticket example letter – LEAD by GFAAS 7105 Centers for Disease Control and
Background Correction – Atomic Absorption Spectroscopy

AAS and ICP Determination of Heavy Metal Content in Tobacco

Atomic Absorption Spectrophotometer (AAS) GBC Scientific

Flame Type Atomic Absorption SPECTROPHOTOMETERS S
Background Correction In AAS – Can You Really Trust It As

Improved Methods for Fluorescence Background Subtraction from Raman Spectra P.J. Cadusch1, M.M. Hlaing2, S a background-correction algorithm for Raman spectra has been developed using wavelet peak detection, wavelet derivative calculation for peak width estimation, and penalized least squares background fitting.[22] This approach adaptively separates the measured data samples into …
iCE 3000 Series Atomic Absorption Spectrometers Flame and furnace AAS analysis for routine laboratories • 2 3 iCE 3000 Series AAS Simple, automated, single element analysis by flame or graphite furnace AAS from ppb to % The Thermo Scientific™ iCE™ 3000 Series AAS enables simple measurement of elements in a wide range of samples. The flame atomizer is ideal for the …
Atomic absorption spectroscopy (AAS) is fundamentally a very simple technique. Light at the resonance wavelength of an element can be absorbed by atoms of that element in the vapor phase. This reduction in light from the source is the AAS signal. It is monotonically correlated with the number of
Title: Background Correction In AAS – Can You Really Trust It As Much As You Do? Author: Oliver Büttel; Analytik Jena AG Subject: Background Correction (BGC) is an essential part of any spectrometric analysis.
Background Correction for Blood-Lead Determination in Customer-Validated Applications. 2 Instrumentation A PinAAcle 900T flame and longitudinal Zeeman furnace atomic absorption spectrometer was used for all measure- ments. A PerkinElmer Lumina™ single-element Pb hollow cathode lamp (Part No. N3050157) was used as the light source and argon was the normal gas type. …

Background correction in AAS es.scribd.com
experimental chemistry Smith Hieftje correction method

The correction for background radiation is typically made by first selecting background points or regions and then a correction mode or algorithm. The ‘algorithm’ or ‘correction mode’ depends upon the curvature of the background, as is illustrated below.
Non-specific absorption in AAS (absorption background) is an attenuation of the analytical line radiation, which is not caused by absorption by free atoms of the element. If the non-specific absorption is not corrected it induces a positive bias. It is much more serious for GF AAS as compared to F AAS, especially in the region of 180-350 nm. Non-specific absorption is caused by light
Atomic Absorption Spectrophotometer (AAS) All of our AAS’s are controlled by GBC’s fully featured Windows® based software, and include a complete range of accessories such as the System 5000 graphite furnace system, HG3000 hydride system, and autosampler/dilutors.
Atomic Absorption Spectrophotometers (AAS) Atomic absorption spectroscopy (AAS) determines the presence of metals in liquid samples. Metals include Fe, Cu, Al, Pb, Ca, Zn, Cd and many more.
Design Considerations for High Performance Background Correction Systems in Atomic Absorption Spectrometry The Thermo Scientific iCE 3000 Series AA Spectrometers are fitted with highly efficient background correction systems for flame and furnace use. Their important design features are described in this article along with discussions on the advantages and disadvantages of other …
2 continuum or Zeeman background correction to control flame or molecular absorption. High High concentrations of calcium, sulfate, carbonate, phosphate, iodide, fluoride, or acetate can be corrected.
Accurate background correction. Analysis of environmental samples for trace level analytes requires precise accurate measurement. This is critical where transient background and analyte signals in the graphite furnace change rapidly with time and introduce measurement errors.
Background correction The D2 lamp background correction capability at 1A is better than 30 times The S-H background correction capability at 1.8A is better than 30 times. Light Source System Lamp turret 6-lamp turret 4-lamp turret
The Smith-Hieftje background correction is a bit more complicated. Basically what happens is that this emission tube has two parts. A heater to vaporize the source of the atoms in the tube and an electron beam to stimulate an excited state. In this type of emission tube the heater is pulsed high and low. When the heater is low it produces enough metals atoms so that the atomic line emission is

Dynamic range improvement and background correction in
Atomic Absorption Spectrophotometer new Labnics

2 continuum or Zeeman background correction to control flame or molecular absorption. High High concentrations of calcium, sulfate, carbonate, phosphate, iodide, fluoride, or acetate can be corrected.
I am detecting Ca with an AAS Method using an Perkin elmer AAnalyst800. The resulsts are satisfying. Nevertheless I have no Idea why I don´t have to use any kind of background correction
Atomic Absorption Spectrophotometer (AAS) All of our AAS’s are controlled by GBC’s fully featured Windows® based software, and include a complete range of accessories such as the System 5000 graphite furnace system, HG3000 hydride system, and autosampler/dilutors.
The iCE 3000 Series AAS enables simple measurement of elements in a wide range of samples. The flame atomizer is ideal for the measurement of high concentration samples, whilst the furnace atomizer achieves sub ppb detection. The dual atomizer system with Stockdale optics incorporates advanced background correction with a unique quadline deuterium source and optional Zeeman correction to
• Deuterium lamp background correction. • Self-absorption background correction. Integrated Design • The GeminAA features an integrated flame and graphite furnace design that contains the optical system, atomizer, graphite furnace power supply and electronics all in one unit. This makes it one of the most compact Tandem AAS in the world. • Optimized lamp power supply technology to

Atomic Absorption Spectroscopy (AAS) Web.nmsu.edu
Criminal Justice Corrections (CRJ.CRO.AAS)

Design Considerations for High Performance Background Correction Systems in Atomic Absorption Spectrometry The Thermo Scientific iCE 3000 Series AA Spectrometers are fitted with highly efficient background correction systems for flame and furnace use. Their important design features are described in this article along with discussions on the advantages and disadvantages of other …
The experimental results for the background absorption induced by scattering of radiation are in good agreement with theory. Substantial additional distortions in the output signal due to interaction of molecular vapor with the graphite surface arise in the case of a molecular background.
Corrections and Police Science. Students must maintain a 2.0 (C) cumulative GPA (General Education Students must maintain a 2.0 (C) cumulative GPA (General Education and vocational courses) to graduate under the CRJS program.
A new method is described and tested for background correction in atomic absorption spectrometry. Applicable to flame or furnace atomizers, the method is capable of correcting back-grounds caused
A newly developed method of background correction for atomic absorption spectrometry combined with the Varian Techtron carbon rod atomizer, model 63, has been applied to the direct determination of Pb, Zn, Fe, Cu, Ni, Co, and Cd in sea water.
I am detecting Ca with an AAS Method using an Perkin elmer AAnalyst800. The resulsts are satisfying. Nevertheless I have no Idea why I don´t have to use any kind of background correction

SavantAA Zeeman enduro GBC Scientific Equipment
Background correction Annual Reports on Analytical

The correction for background radiation is typically made by first selecting background points or regions and then a correction mode or algorithm. The ‘algorithm’ or ‘correction mode’ depends upon the curvature of the background, as is illustrated below.
BG = Background Absorbance; AA = Atomic Absorbance. Peak Profile – For GF-AAS, peak profile (shape of absorbance vs. time graph) is used to evaluate the quality of the analyte atomization.
AS TechniquesAS Techniques for the Analysis of Environmental SamplesEnvironmental Samples Novj Sad 2008, January 30th Riccardo Magarini ICPMS /ICPOES /AAS specialist
PDF For a long time simultaneous multielement determination by AAS has been a subject of intensive research. In this work a simultaneous multielement atomic absorption spectrometry method is
background correction system, included as standard with all models. • The GBC performance guarantee – sensitivity and precision superior to that of any other instrument manufacturer. •Data storage using a high capacity hard disk. Storage is provided for applications, results, graphics, sample labels, weights and dilutions, report headings, etc. GBC makes validation easy. The GBC IQ/OQ/PQ
Criminal Justice – Corrections (CRJ.CRO.AAS) Associate in Applied Science Human Services Auburn Hills Campus The Corrections program provides students with an educational background in: police administration and procedures, criminal investigations, and law. Graduation fulfills the entrance requirements for the Police Academy at OCC. NOTE: Completion of an academy is required to …
The experimental results for the background absorption induced by scattering of radiation are in good agreement with theory. Substantial additional distortions in the output signal due to interaction of molecular vapor with the graphite surface arise in the case of a molecular background.
Concepts, Instrumentation and Techniques in Atomic Absorption Spectrophotometry Richard D. Beaty and Jack D. Kerber Second Edition THE PERKIN-ELMER CORPORATION
Background Correction D2 D2 Lamp Current 75% 75% Signal Measurement Continuous Continuous Measurement Time 4s 4s Replicates3 3 . 2 Figure 1: An example of Spectrometer parameters for iron. Sample Preparation Standards Iron and magnesium stock standard solutions containing 1000 mg/L of each were diluted with a pre-mixed solution of deionised water and analytical grade concentrated …
Interference is a phenomena that leads to changes in intensity of the analyte signal in spectroscopy. Interferences in atomic absorption spectroscopy fall into two …
Title: Background Correction In AAS – Can You Really Trust It As Much As You Do? Author: Oliver Büttel; Analytik Jena AG Subject: Background Correction (BGC) is an essential part of any spectrometric analysis.

Background correction Annual Reports on Analytical
Fitted Background Correction (FBC)— fast accurate and

Background correction The D2 lamp background correction capability at 1A is better than 30 times The S-H background correction capability at 1.8A is better than 30 times. Light Source System Lamp turret 6-lamp turret 4-lamp turret
A new method is described and tested for background correction in atomic absorption spectrometry. Applicable to flame or furnace atomizers, the method is capable of correcting back-grounds caused
Non-specific absorption in AAS (absorption background) is an attenuation of the analytical line radiation, which is not caused by absorption by free atoms of the element. If the non-specific absorption is not corrected it induces a positive bias. It is much more serious for GF AAS as compared to F AAS, especially in the region of 180-350 nm. Non-specific absorption is caused by light
The experimental results for the background absorption induced by scattering of radiation are in good agreement with theory. Substantial additional distortions in the output signal due to interaction of molecular vapor with the graphite surface arise in the case of a molecular background.
Perfect background correction (BC) can be obtained only when the background absorbance measurement corresponds exactly in space, time, and wavelength with the atomic absorbance measurement. Since exact coincidence of all three parameters is obviously impossible, it is customary to give priority to the equality in space and to make the difference in time and/or wavelength as small …
BG = Background Absorbance; AA = Atomic Absorbance. Peak Profile – For GF-AAS, peak profile (shape of absorbance vs. time graph) is used to evaluate the quality of the analyte atomization.
I am detecting Ca with an AAS Method using an Perkin elmer AAnalyst800. The resulsts are satisfying. Nevertheless I have no Idea why I don´t have to use any kind of background correction
The correction for background radiation is typically made by first selecting background points or regions and then a correction mode or algorithm. The ‘algorithm’ or ‘correction mode’ depends upon the curvature of the background, as is illustrated below.
AS TechniquesAS Techniques for the Analysis of Environmental SamplesEnvironmental Samples Novj Sad 2008, January 30th Riccardo Magarini ICPMS /ICPOES /AAS specialist
Atomic Absorption Spectroscopy (AAS) The following is general background for AAS and for specific operational details on the protocol for the P-E 3030B or the 800 AAnalyst . Introduction — Atomic-absorption spectroscopy (AAS) uses the absorption of light to measure the concentration of gas- …
Improved Methods for Fluorescence Background Subtraction from Raman Spectra P.J. Cadusch1, M.M. Hlaing2, S a background-correction algorithm for Raman spectra has been developed using wavelet peak detection, wavelet derivative calculation for peak width estimation, and penalized least squares background fitting.[22] This approach adaptively separates the measured data samples into …
Design Considerations for High Performance Background Correction Systems in Atomic Absorption Spectrometry The Thermo Scientific iCE 3000 Series AA Spectrometers are fitted with highly efficient background correction systems for flame and furnace use. Their important design features are described in this article along with discussions on the advantages and disadvantages of other …